¡¡ FG Deep-cold
Bonding Agent is created through warming reaction with the base
material of petroleum asphalt added with organic solvent and
raw material such as macromolecule resin and organic plasticizer.
It has strong binding power, good frost resistance, can bind
and mold material such as cellular glass in deep cooling part
and polyaminoester not in deep cooling part. It has good pliability
and binding power at low temperature. It is the special binding
agent of cooling insulation and heat insulation because it has
good binding power at the temperature ranging from ¨C196¡æ to
+60¡æ in place of heat insulation and cooling insulation of petroleum,
chemical engineering and equipment pipeline.
Method
of Application
1.Heat the binding agent to 180¡æ~200¡æ to melt it before using.
2.Smear the melted binding agent on the binding
surface of cellular glass or polyaminoester with tools such
as scraper, brown brush or self-made brush, bind and press
it taking the advantage of warmth and raze off additional
binding agent a bit cold after fixing. The coating of binding
agent should be even and there is no spacing at the pasted
seam.
3.The binding
agent should be melted when using and should not be heated
in long time or in high temperature. We can judge it by the
color of smoking from blue to white to yellow. We should notice
the color of yellow because it is near to the fire point.
|
